IA-3121-E
11
Specifications are subject to change without notice
32-ch Solid-State Relay (SSR) Board,
Ethernet IP Controlled
IA Series-3000 Daisy-Chain
!aa2dddddddd – Set relay status
Description
This command defines module’s relay state.
Syntax
!aa2dddddddd <CR>
!
Delimiter character
aa
Hexadecimal address of the device
2
System control command
d
Relay output activation command data for each nibble in hex format
<CR> Carriage Return - End of command
Response
|dddddddd
if the command was valid and if FB messages are enabled
Example
Command: !00280008000 <CR>
Response: | 80008000 <CR>
This command will activate relay #16 and #32
