IA-2660-E
4
Specifications are subject to change without notice
Isolated TCP/IP
96 Digital TTL/LVTTL
Pluggable Terminal Blocks
Introduction
The IA-2660-E Digital I/O device includes 12 groups of 8 Digital I/O each. Each group may be
independently set as an Input or as an Output. Setting a group to Input doesn't reset its output
register so the Port Direction may be used as output Active/Non-active control.
Output state of each channel may be controlled by a 96-ch width command that affecting Output
channels, by an 8 channels command, or by a single channel command. Same for reading the inputs
state.
The input state can be read by a 96-ch width command, by 8-ch command, or by a single channel
command. These input state reading commands can be used for both Input and Output monitoring.
The IA-2660-E internal operation Voltage can be set to either 3.3V or to 5V, affecting the output
level as well, in order to best fit to and best interface with external 2.7 to 5V operated devices.
The IA-2660-E includes an Ethernet communication port while an Isolated USB port version - IA-
2660-Ui, is available as well.
The device support includes Visual Studio DLL, Open Source software examples, Web Page program
to change the device IP address and operation mode, and several utilities to easily set the groups
direction set the output channels state, and to monitor the input state. Command Line feature
within the utility is the easiest, quickest way to check and learn the device various commands.
Features
•
96-ch Digital I/O Controller
•
Input/output Direction is set by Groups of 8-ch each
•
Output Commands can handle 1-ch/8-ch/96-ch at a time
•
Output Registers Read Back ready
•
Output Command Activity may be Synchronized by H/W or S/W Input
•
Input state can be read at 1-ch/8-ch/96-ch width
•
Pulling resistors may be set to a Positive source or to GND
•
Visual Studio DLL
•
Open source software examples
•
Pluggable Wiring System
•
DIN-Rail mounting ready
