Intellian t100Q, Installation And Operation Manual

Page: 79 / 141

79
OPERATING THE ACU
5. Set the current LATITUDE and LONGITUDE
Press LEFT and RIGHT arrow keys until the desired character is underscored
(selected). Press UP and DOWN arrow keys to increase or decrease the value, or press
NUMBER keys to set the desired value directly. Press the OK key to set the parameter.
6. Entry of ship’s heading is not required when your system is connected to a NMEA(0813)
or NMEA2000 Heading Gyrocompass output. Ensure that the supported Gyro Type is set
correctly.
7. Press LEFT arrow key to move cursor to YES and press OK key to save current settings, or
move cursor to NO and press OK key to abort and return to the main display.
4
L A T I T U D E L O N G I T U D E
5 2 . 2 2 N 4 . 5 3 E
H E A D I N G
0 0 0 . 0
GYRO TYPE*
NO DEVICE
NMEA
NMEA2000
GROUND TEST
S A V E ?
4
Y E S N O