7
the mode by pressing [UP] or [DOWN] button
Ⅳ
Audi : Audio Run mode
press ENTER button when show the
Audi
menu, then adjust
the mode by pressing [UP] or [DOWN] button
Ⅴ
Color: Show color mode
press ENTER button when show the
Color
menu, then adjust
the color by pressing [UP] or [DOWN] button
6 Hr: Show the time of power on
A:Show time
press ENTER button when show the
Time
menu ,then you will see
the time of power on .
B: clear the time
press ENTER button when show the Hr menu, and then press up
and down button at the same time for few second,then the time
will be clear to 0000.
7 Color Calibr: Color Calibrate
1.
press ENTER button when show the
Color Calibr
menu, then chose
theRed,Green,Blue calibrate by pressing [UP] or [DOWN] button
2. Press ENTER to enter the color calibrate you chosed, then ajust the
brightness of this color by pressing [UP] or [DOWN] button
3 .Press [ENTER] to confirm or pressing [ESC] to return to main
menu.
8 Temp :Temperature information
A:Show Temperature
press ENTER button when show the
Temp
menu,and you will see
the temperature of the led in
℃
,if there are no temperature
sensor,it will show
Err
Notes!
The brightness will decrease gradually when the led
temperature is over 55
℃
,and if over 70
℃
,then will black out
B: Temperature Calibrate
press ENTER button when show Temperature, then adjust
the Temperature by pressing [UP] or [DOWN] button to the exact
Temperature
8 Config: Parameter Config
press ENTER button when show the
Config
menu, then chose
the Parameter
by pressing [UP] or [DOWN] button then press enter
A:
Channel mode: Chose the Channel mode
Chose the Channle mode by pressing [UP] or [DOWN] button then
press enter to confirm.
B:
Dimmer Mode: Chose instant or delay mode
Chose the mode by pressing [UP] or [DOWN] button then press
enter to confirm.In
Dimmer instant
mode ,the light will be on
Summary of Contents for storm 300 RGBW
Page 1: ...24PCS ...
