The Intelix INT-IPSW1108 is an eight port 10/100BaseT Ethernet switch with
PoE+ (up to 15w per downlink port). The switch features two operation modes:
Default and Isolate. In Default mode, the switch will pass data between all
downlink and uplink ports, similar to a standard Ethernet switch. In Isolate
mode, downlink ports will only communicate with the uplink port. The
INT-IPSW1108 includes a Kensington lock slot to prevent theft.
Front Panel
Rear Panel
1 2
3
A
B
C
D
E
1. Isolate Active LED
2. Operation Mode Selection Switch
Default: Data will pass between all downlink and uplink ports
Isolate: Data will only pass from the individual downlink ports directly to the
uplink port.
3. Power LED
A. Power Input
B. 10/100BaseT Downlink Ports 1 through 4 with Status LEDs
C. 10/100BaseT Downlink Ports 5 through 8 with Status LEDs
D. 10/100BaseT Uplink Port with Status LEDs
E. Ground Screw
