Intelix
DIGI-VGASD-8X8e
Installation Manual
www.intelix.com
5
Installation
To install the Intelix DIGI-VGASD-8X8e matrix switcher, please perform the
following steps.
1.
If mounting in a 19” audio/video rack, verify the rack has one rack space
unit (1RU) of open space.
2.
Power-off the source and destination audio and video devices.
3.
Connect the input sources to the DIGI-VGASD-8X8e using high-quality
audio and video cables.
Ventilation when Rack Mounting
At least 2 inches of free air space is required on both sides of
the DIGI-VGASD-8X8e for proper side ventilation.
Ensure there are no closeable doors on the rack that might seal
the DIGI-VGASD-8X8e from a steady supply of cool air.
Avoid mounting the DIGI-VGASD-8X8e near a power
amplifier or any other source of significant heat.
It is recommended that you leave an empty rack space above
and below the DIGI-VGASD-8X8e for additional cooling.
Note:
All connecting audio-visual equipment must be powered off.
Note:
Intelix recommends labeling all analog audio and video
inputs to aid in software and control system programming.
