ViewFlex Ca mera Assembl y Ins tructions
4
© 2019 Intelitek - Al l Rights Reserved
1.
Assembling the Camera Stand
The camera stand for the Cognex (#00-1430 -0000) is used to hold the Cognex Vision Sensor (QC
camera) in position in order to carry out ViewFlex operations. This section describes how to attach the
camera to the camera stand.
To assemble the camera stand:
1.
Secure the base to a table.
▪
On a slotted table, screw four M5 Allen screws through the base and into four M5 slot nuts
(shown below).
▪
On a Formica table, secure the base directly to the table using four pan head Phillips screws.
▪
If you are connecting the stand to a CIM track, use the angular connector with accompanying
bolts and nuts (catalog number 110633).