5 Using the Control Software
5.6 Verifying an NC Program
68
5.6.3.
Configuring Verify Settings
The settings in the Verify Settings window specify how the verification is displayed
The Verify Settings window is accessed by clicking
Verify Settings
on the Verify Program window.
The Verify Settings window consists of three tabs.
The settings available in this window are described below, arranged by tab.
Info Table: Verify Settings Window
View Tab
Select whether the workpiece should be displayed in wireframe or solid view.
Wireframe
Solid
Select whether the workpiece should be shown in top, front, or solid view.
Top
Front
Isometric
