THE KIT INCLUDES
• Anti-Bark Spray device
• An adjustable collar
• A can of stainfree, hypo-allergenic spray
• One 6-volt alkaline battery
• Instruction guide
PREPARATION
Adjusting the collar to the spray device
Remove the keeper from the black collar (1). Pass the
black collar through the loops (2) of the spray device
(3) while making sure that the collar does not block the
microphone’s opening (4). Put the keeper back on the
collar (5). The curved edge of the keeper should face
inside.
Feed the free end of the collar into the slot of the buck-
le that is closest to the Intellipet logo from the back to
the front (6). Then, thread the free end of the collar
through the outside slot from the front to the back (7).
The free end should now hang on the outside, then
thread the keeper (8). When you have completed this
section, the assembled collar looks as illustrated (9).
Take off all other collars your dog may be wearing and
place the Spray Collar around his neck, making sure
the spray valve is directed toward the snout. Adjust
the collar to fit like a regular collar. You should be able
to easily pass two fingers (10) between your dog’s
neck and the device. We suggest that you check the
collar regularly to make sure that it is well adjusted.
INSTRUCTION GUIDE
Congratulations on your purchase of Intellipet’s
Anti-Bark Spray Collar!
This revolutionary product
combines modern electronics, with state-of-the-art
spray technology and proven behaviour modification
techniques. Our Anti-Bark Spray Collar was designed
to assist you in training your dog and controlling his
nuisance barking. Its comforting effect allows dogs to
adapt easily and quietly to their environment while
providing peace of mind to their owners.
This instruction guide will provide you with all the infor-
mation required to maximize the efficiency of your new
Anti-Bark Spray Collar.
Our Anti-Bark Spray Collar is highly efficient because
it distracts the animal’s primary sensory perceptions in
a harmless, painless way. It is scientifically proven to
be the most effective, the quickest and most viable
solution for the problem of nuisance barking. The
system works automatically and requires no human
intervention. Your dog will stop barking while wearing
the collar. However, the effect of the Anti-Bark Spray
Collar is not permanent. If you stop using the collar,
your dog will eventually resume barking. In order to
reduce barking permanently without constantly using
the device, you will have to combine the Anti-Bark
Spray Collar with proper training and elements of
behaviour modification.
Further studies have proven that the Anti-Bark Spray
Collar reduces nuisance barking by 88% and that
dogs will bark only in emergency situations.
Note:
If these instructions are
not properly followed, the
buckle can easily be pulled off
the collar. This could lead to
the device being lost or dam-
aged.
Your dog must get used to the
device before you actually
start using it. We suggest that
you make your dog wear the
Anti-Bark Spray Collar during 4
to 5 days before inserting the
battery and filling the device.
At the same time, we also sug-
gest that you remove and put
the collar back frequently on your dog.
FILLING THE DEVICE
1. Set the device on a flat surface, with the fill-up valve
turned upwards (11). Shake the spray can before
using it.
2. Hold the can upside down, then insert the aerosol
tip in the fill-up valve – the deepest cavity (12) – then
press down firmly for 10 seconds (13). Release
pressure and press down for another 10 seconds,
then release.
Note:
If spray is escaping as you attempt to fill the
device, increase the downward pressure on the refill
can to get a better seal. You cannot overfill the device.
When completely filled, there should be enough gas in
your device for 18-23 sprays.
INSERTING THE BATTERY
Slide off the battery cover (14) and insert the 6-volt
alkaline battery without forcing it (15), keeping the
polarity in mind (+ and -). Slide the cover back on (16).
Turn the device on
- Before every use, it is best to
test the device by blowing into the microphone.
Adjust the Spray Collar onto the dog’s neck with
the microphone’s opening facing inwards. Direct
the spray valve towards the dog’s snout.
Your Anti-Bark Spray Collar will now react when
your dog barks. Training, in addition to using the
device, will accelerate and consolidate the desired
behaviour modification.
1
2
3
4
5
6
7
9
10
11
12
13
14
15
8
16