Intelimax LITE User Manual
V1.1
22
IP Stack Configuration
IP stack configuration page is used to setup modem IP STACK settings such as port
number and IP address and connection timeouts.
Protocol:
IP Stack supports TCP and UDP, depending on your application requirement you can
choose between TCP and UDP communication
Mode:
Intelimax LITE supports two IP Stack operation modes:
Server mode:
In Server mode the modem will connect to a PPP session and will listen
on a predefined port for incoming client requests.
Client mode:
the modem will initiate a PPP connection and try to connect to the
Primary server. If the connection to the server fails 10 times it will try the Secondary
server, if the connection to the secondary server also fails for 10 times the modem will
drop the PPP connection, reboot and start all over again.
