6. Installation
The XSS 8000 wireless siren has a specific base to be fixed on various surfaces, such as walls,
wooden bases, among others. Fix the base with screws¹ on the desired surface and then attach
it to the base. Make sure that the base is correctly attached to the surface and the siren, so that
they do not come off.
Warning:
due to the vibration of the siren when activated, it is not recommended to fix it with
double-sided tape so that there is no detachment of the surface and possible falls.
Bracket for fixing to surfaces
1
Screws and other accessories are not included with the siren and must be purchased separately.
7. Operation
The siren when registered at the alarm center will receive sound signals on activation/
deactivation, intrusion and problem warnings, these events being configurable and reported in
the AMT 8000 alarm center manual.
8. Battery
Use only quality batteries with the correct sizing for the device, and with the typical use of the
device, the battery life forecast is 3 to 5 years and can be influenced by the number of triggering,
weather conditions and configuration mode.
The battery model must be non rechargeable
Li-SoCl2 3.6V 14A w/ Wire/Connector.
Battery
Warning:
in case battery replacement is required, please contact our accredited service
network.
The indication of the low battery level of sirens will be demonstrated on the keyboard displays
and/or in applications with respective events.
To replace the XSS 8000 siren’s batteries, remove it from the base where it is attached and
remove the used battery connector and add a new one, checking the correct position, then
return it to its base/place of installation.
Battery Compartment
Note:
programming and registration between siren and center will not be lost when the battery
is removed or the center where it is registered is turned Off.
9. Homologation
05326-18-00160
This equipment is not entitled to protection against harmful interference and may not cause
interference to duly authorized systems.
Warranty term
It is expressly stated that this contractual warranty is given subject to the following conditions:
Name of customer:
Signature of the customer:
No. of the invoice:
Date of purchase:
Model:
Serial
No:
Reseller:
1. All parts and components of the product are under warranty against possible manufacturing defects, which
may present, for a period of one (1) year, – comprising 90 (ninety) days of legal warranty and 9 (nine) months
of contractual warranty, –, counted from the date of purchase of the product by the Consumer, as stated
in the invoice of purchase of the product, which is part of this Term throughout the national territory. This
contractual warranty includes the express exchange of products that are defective in manufacture. In case no
manufacturing defect is found, but flaw(s) from inappropriate use, the Consumer will bear these expenses.
2. Product installation must be done in accordance with the Product Manual and/or Installation Guide. If your
product needs to be installed and configured by a qualified technician, look for a suitable and specialized
professional, and the costs of these services are not included in the value of the product.
3. If the defect is found, the Consumer should immediately communicate with the nearest Authorized Service
listed by the manufacturer, – only they are authorized to examine and remedy the defect during the warranty
period provided herein. If this is not respected, this guarantee will lose its validity, as the violation of the
product will be characterized.
4. In the event that the Customer request home care, he/she should refer to the nearest Authorized Service
for the technical visit fee. If the need for withdrawal of the product is found, the expenses arising, such as
transportation and safety to and from the product, are under the responsibility of the Consumer.
5. The warranty will totally lose its validity in the event of any of the following: a) if the defect is not of
manufacture, but caused by the Consumer or by third parties alien to the manufacturer; b) if the damage to
the product comes from accidents, claims, agents of nature (lightning, floods, landslides, etc.. ), humidity, mains
voltage (overvoltage caused by accidents or excessive mains fluctuations), installation/use in disagreement
with the user manual or due to natural wear of parts and components; c) if the product has been influenced
by chemical, electromagnetic, electrical or animal (insects, etc.); d) if the product’s serial number has been
tampered with or erased; e) if the device has been tampered with.
6. This warranty does not cover loss of data, so it is recommended that the Consumer make a regular backup
of the data on the product.
7. Intelbras is not responsible for the installation of this product and also for any attempts of fraud and/or
sabotage on its products. Keep software and application updates, if any, up to date, as well as network
protections necessary to pro¬tect against hackers. The equipment is guaranteed against flaws within its
normal conditions of use, and it is important to be aware that, since it is an electronic equipment, it is not free
from frauds and scams that may interfere with its correct functioning.
8. This product has an internal battery. After their useful life, the batteries must be delivered to an authorized technical
assistance office at Intelbras or directly to the environmentally appropriate final disposal, avoiding environmental
impacts and health. If you prefer, the battery, as well as other unused Intelbras electronics, can be disposed of at any
Green Eletron collection point (electronic waste manager to which we are associated). In case of doubt about the
reverse logistics process, please contact us by phone (48) 2106-0006 or 0800 704 2767 (Monday to Friday from 8
am to 8 pm and on Saturdays from 8 am to 6 pm) or through e -mail [email protected].
Since these are the conditions of this complementary Warranty Term, Intelbras S/A reserves the right to change the
general, technical and aesthetic characteristics of its products without prior notice.
The manufacturing process for this product is not covered by the requirements of ISO 14001.
All images in this manual are illustrative.
01.20
Made in Brazil
Customer Support:
(48) 2106 0006
Forum:
forum.intelbras.com.br
Support via chat:
intelbras.com.br/suporte-tecnico
Support via e-mail:
Customer Service:
0800 7042767
Where to buy? Who installs it?
0800 7245115
Produced by: Intelbras S/A – Indústria de Telecomunicação Eletrônica Brasileira
Rodovia BR 459, km 124, nº 1325 – Distrito Industrial – Santa Rita do Sapucaí/MG – 37540-000
CNPJ 82.901.000/0016-03 – www.intelbras.com.br