10
2. After that, select sensors;
Settings
General
>
Zones
>
Passwords
>
Communication
>
Event codes
>
IP monitoring
>
Ethernet/Wi-Fi
>
GPRS
>
Programed activation/deactivation
>
Sensors
>
Once you have done this, select the sensor you wish to configure, for example:
Sensor 1
Sensors
Sensor 1 >
Sensor 2 >
Sensor 3 >
Sensor 4 >
Sensor 5 >
Sensor 6 >
Sensor 7 >
Sensor 8 >
Sensor 9 >
...Sensor 64 >
After selecting the sensor, the following adjustment screen will open.
Sensor 1
Sensitivity
Level 0 (minimum sensitivity)
Level 1 (normal sensitivity, factory default)
Level 2 (intermediate sensitivity)
Level 3 (maximum sensitivity)
LED
Always Off
On when triggered
Modo de operação
Economy mode
Continuous mode
Discard changes
Save
Note:
for configuring the settings, check the sensitivity table, the explanations of LED operation and the Operation
mode in item 9.2. Information on the sensor settings.
Summary of Contents for IVP 8000 EX
Page 1: ...User guide IVP 8000 EX...
