Intel® Visual Compute Accelerator Product Specification and Hardware User’s Guide
18
Figure 8. Auxiliary 12V Power Cable (iPC AXXGPGPUCABLE)
Riser slots 1 and 2 are capable of supporting up to 100W maximum power each. Available power to each
add-in card slot on a given riser card is defined by the PCIe* specification. Add-in cards with power
requirements above 75W will require the additional power to be drawn from either of two 2x2 pin
“OPT_12V_PWR” connectors on the server board. A 12V Aux power cable is routed from the “OPT_12V_
PWR” on the server board to a 6 or 8 pin 12V AUX power connector located on the add-in cards.
NOTE: Both the 2-Slot PCIe Riser card and the 12V Auxiliary Power cable are included in Intel Accessory kit
A2UL16RISER2
High power add-in cards with
passive cooling
solutions (no fan on the heat sink) can
only
be supported
in systems configured with the high air flow air duct included in Intel Accessory Kit
AWTCOPRODUCT.
Figure 9. Air Duct included in Intel® Accessory Kit AWTCOPRODUCT
AWTCOPRODUCT Air Duct notes:
The high air flow air duct included in Intel Accessory Kit AWTCOPRODUCT includes two plastic knock-out
panels to allow for additional air flow over a specific riser card area. A knock-out panel is only removed when
installing a high power add-in card that meets the following criteria:
o
Double wide
o
Passive Heat Sink Solution (heat sink with no fan attached)
Summary of Contents for VCA1283LVV
Page 2: ......
