FLIK Getting
Started Guide
7
www.terasic.com
April 30, 2020
Figure 1-3 Block diagram of the FLIK
1.5
Key Features
The following hardware is implemented on the FLIK board:
FPGA
Intel Arria ® 10 FPGA 10AX115N3F40E2SG
FPGA Configuration
On-Board USB Blaster II via Thunderbolt 3 Port
AS x4 configuration via QSPI Flash
Clock System
50MHz and 100MHz Oscillators
Programmable clock generators Si5340
Memory
Two Independent DDR4 banks, 4GB 1066MHz for each.
1024Mb QSPI Flash
