197
11.
Install the memory board or the memory board air baffle into Slot C. For instructions, see
“
Cold Insertion of a Memory Board
”, page 165.
12.
Re-install the top cover. For instructions, see “
Removing the RAID DDR2 DIMM
1.
Observe the safety precautions, warnings, and cautions described in “
2.
Turn off all peripheral devices connected to the system.
3.
Power down the system and unplug both AC power cords.
4.
Remove the top cover. For instructions, see “Removing the Top Cover”, page 144.
5.
Remove the memory board or the memory board air baffle from Slot C. For instructions, see
“
6.
Gently spread the retaining clips at each end of the RAID DIMM socket. The DIMM lifts from
the socket.
7.
Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
8.
Close the latches.
9.
Install the memory board or the memory board air baffle into Slot C. For instructions, see
“
Cold Insertion of a Memory Board
”, page 165.
10.
Re-install the top cover. For instructions, see “
