Intel SR2600UR - Server System - 0 MB RAM, Service Manual

Page: 98 / 234

78 Intel
®
Server System SR2600UR/SR2625UR Service Guide
Installing a Slimline Optical Drive or Internal USB Floppy
To install a slimline optical drive or internal USB floppy in Intel
®
Server System
SR2600UR, follow these steps:
1. Remove the empty tray and screw from the accessory kit box and obtain the optical
device.
2. Plug the interposer board connector into the matching connector on the back of the
optical device (see letter “A” in Figure 63 ).
Figure 63. Installing the Interposer Board
3. Align the two holes on the left edge of the optical device with the two metal tabs in
the tray (see letter “A” in Figure 64 ).
4. Lower the opposite side of the optical device into the tray until it clicks into place
(see letter “B” in Figure 64 ).
Figure 64. Installing the Optical Device into the Drive Tray
Optical
Device
Connector
A
Interposer
AF002962
Metal Tab
A
B
AF002963