Intel SR1630GP - Server System - 0 MB RAM, Service Manual

Page: 62 / 196

40 Intel
®
Server System SR1630GP / SR1630HGP Service Guide
Installing the Processor
To install a processor, follow these instructions:
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the server system cover. For instructions, see
“Removing the Server
System Cover” on page 30 .
4. Locate the processor socket and raise the socket handle completely. See Figure 25 .
Figure 25. Lifting the Processor Socket Handle
5. Push the rear tab with your finger to slightly lift the front of the load plate. Raise the
load plate completely. Raise the CPU load plate (see Figure 26 ).
REMOVE
AF003186
A
B