Intel SBXD132 - Server Compute Blade, Installation And User Manual

Page: 18 / 130

10 Intel® Server Compute Blade SBXD132 Installation and User’s Guide
Shut down the operating system before you turn off the blade server. See the operating-
system documentation for information about shutting down the operating system.
The blade server can be turned off in any of the following ways:
•
You can press the power-control button on the blade server (behind the control panel
door, see “Understanding the Control Panel and LEDs” on page 10 ). This starts an
orderly shutdown of the operating system, if this feature is supported by the operating
system.
Note: After turning off the blade server, wait at least 5 seconds before you press the
power-control button to turn on the blade server again.
•
If the operating system stops functioning, you can press and hold the power-control
button for more than 4 seconds to turn off the blade server.
•
The management module can turn off the blade server.
— If the system is not operating correctly, the management module will
automatically turn off the blade server.
— Through the management-module Web interface, you can also configure the
management module to turn off the blade server. For additional information, see
the Intel
®
Blade Server Management Module SBCECMM: Installation and User’s
Guide .
Understanding the Control Panel and LEDs
This section describes the controls and LEDs on the blade server.
Note: The control panel door is shown in the closed (normal) position in the
following illustration. To access the power-control button, you must open the
control panel door.
KVM select button
Activity LED
Location LED
Information LED
Blade-error LED
Media-tray select
buttom
Power-control button
Power-on LED
AF000941