Intel SBCEFCSW, Installation Manual

Page: 53 / 62

39
You can use the fabric tree to access any fabric or switch using the Topology or Faceplate window. You can
click a fabric entry to open the Topology window from the fabric tree. You can click a switch entry to open the
Faceplate window from the fabric tree.
Graphic window: The graphic window presents graphic information about fabrics and switches such as the
fabric topology and the switch faceplate. You can adjust the window length by clicking and dragging the
window border that it shares with the data window.
Data window and tabs: A table of data and statistics associated with the selected tab is displayed in the data
window. Use the scroll bar to browse through the data. The window length can be adjusted by clicking and
dragging the border that it shares with the graphic window. The data window tabs present options for the type
of information that is displayed in the data window. These options vary depending on the tab you select.
Working status indicator: The working status indicator is in the lower-right corner of the SAN Utility
window. The indicator is displayed when the network management workstation is exchanging information
with the fabric. As conditions change, the fabric forwards this information to the network management
workstation where it is displayed in the various windows.
Switch modules that are enabled and the connections between switch modules are displayed in the Topology
window, as shown in Figure 23 on page 39.
Figure 23. Topology window elements.
A single switch and its active ports are displayed in the Faceplate window, as shown in Figure 24 on page 40.