Intel S845WD1-E - Server Board Motherboard, Product Manual

Page: 67 / 98

Peripheral Configuration Submenu
To access this submenu, select Advanced on the menu bar, then Peripheral Configuration.
Maintenance Main
Advanced
Security Power Boot Exit
PCI Configuration
Boot Configuration
Peripheral Configuration
IDE Configuration
Diskette Configuration
Event Log Configuration
The submenu represented in Table 21 is used for configuring server peripherals.
Table 21. Peripheral Configuration Submenu
Feature Options Description
Serial Port A
•
Disabled
•
Enabled
•
Auto (default)
Configures serial port A.
Auto assigns the first free COM port, normally COM1, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O Address
(This feature is present
only when Serial Port A
is set to
Enabled )
•
3F8 (default)
•
2F8
•
3E8
•
2E8
Specifies the base I/O address for serial port A, if serial
port A is Enabled.
Interrupt
(This feature is present
only when Serial Port A
is set to
Enabled )
•
IRQ 3
•
IRQ 4 (default)
Specifies the interrupt for serial port A, if serial port A is
Enabled.
Serial Port B
•
Disabled
•
Enabled
•
Auto (default)
Configures serial port B.
Auto assigns the first free COM port, normally COM 2, the
address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates a
conflict with another device.
Base I/O address
(This feature is displayed
only if Serial Port B is set
to Enabled)
•
2F8 (default)
•
3E8
•
2E8
Specifies the base I/O address for serial port B.
Interrupt
(This feature is displayed
only if Serial Port B is set
to Enabled)
•
IRQ 3 (default)
•
IRQ 4
Specifies the interrupt for serial port B.
continued
Configuration Software and Utilities 67