1/7/2009
S7000FC4UR Configuration Guide
Page 3 of 12
2. Revision
History
Date
Rev
Modification
Aug 29, 2006
0.1 NPI
Draft
Dec 1, 2006
0.2
Alpha MM#s Added
Jan 15, 2006
0.3
Added Beta Placeholders
Feb 25, 2007
0.6
Updated Production and Beta SKU information
Mar 25, 2007
0.9
Updated Production Placeholders and Silver SKU information
April 20, 2007
0.95
Updated Production MM#s and Added Spares SKUs
June 22, 2007
0.98
Updated Production MM #s, added spares and Value vs. Enterprise pages
July 15, 2007
1.0
Promoted to rev 1.0 status, removed Pre-Production Order Codes, Improved description of
FFCCABLEKIT, added Boxed Processor Reference codes
July 30, 2007
1.1
Updated Config table with corrections
Sept 1, 2007
1.2
Revised with Corrections
April 21, 2008
1.3 Updated
MM#s
Sept 1, 2008
1.4 Updated
MM#s
Sept 12, 2008
1.5
Updated MM#s, and added Dunnington Boxed and Tray Processor Reference Codes
Dec 1, 2008
1.6 Updated
MM#s
Jan 7, 2009
1.7
Added new SFC4URX 3.5” SKU and new spare Hot Swap Backplane; updated MM#
3. Important
Notes
1. Each S7000FC4UR server system can accommodate up to four memory boards. System SKUs include one memory board
in the base configuration.
2. Product code SFC4URE comes preconfigured with redundant cooling and power.
3. Product code SFC4UR comes preconfigured with 1 power supply and an empty second power supply bay and 2 of 4 rear
fan modules. Additional accessories may be ordered for redundant power and cooling configuration requirements.
4. Systems will not ship with processors, hard drives, or memory. These parts must be obtained separately.
5. Heat sinks are not included with any server systems.
6. Processor thermal blanks must be ordered separately (if no processor is installed).
7. The S7000FC4UR memory board supports FBD 533 or 667 registered DIMMs.
8. The Intel factory will package board orders into single order packaging and ship to fill customer orders. Each board MM is a
self-contained shipping package of one board.
9. Power cords are not shipped with the system and must be obtained from local suppliers.
10. All parts listed below are fully RoHS compliant
.
11. The SFC4URX 3.5” SKU requires a Host Bus Adapter (HBA) or RAID Adapter for operation. The SAS Riser AFCSASRISER
is not used with this SKU. Please refer to the Intel® Server System S7000FC4UR Tested Hardware and Operating System
List or consult your Intel support representative.
