background image

Thank you for buying an Intel® RAID Maintenance Free Backup Unit 4. The Intel® RAID 
Maintenance Free Backup Unit 4 supports the Intel® RAID Controller RS3DC040 and 
RS3DC080. The following information will help you assemble your Intel® RAID 
Maintenance Free Backup Unit 4 and install components.

Perform all installation work at an electrostatic discharge (ESD)-safe workstation that 
meets the requirements of EIA-625, 

Requirements for Handling Electrostatic 

Discharge Sensitive Devices

. You must perform all actions in accordance to the latest 

revision of the IPC-A-610 ESD-recommended practices.

This guide and other supporting documents are located on the web at: 

http://www.intel.com/support.

 

H24048-001

Intel® RAID Maintenance Free Backup 
Unit 4 Quick Installation User's Guide

Проконсультироваться

 

и

 

купить

 

данное

 

оборудование

 

вы

 

можете

 

в

 

компании

 «

АНД

-

Системс

»  

адрес

: 125480, 

г

.

Москва

ул

.

Туристская

д

.33/1; site: https://andpro.ru 

тел

: +7 (495) 545-4870 email: [email protected] 

При

 

обращении

 

используйте

 

промокод

 AND-PDF 

и

 

получите

 

скидку

Summary of Contents for RMFBU4













Reviews: