Intel® Server System R2600SR Setup and Service Guide
66
4.
Remove the retaining screw (see Number 1).
5.
Loosen the rear bracket retaining screws (see Number 2).
6.
Slide the rear bracket away from the add-in card and carefully remove it from the cassette.
3.16.3
Installing the PCIe* Add-in Card
Install the add-in card into the cassette by completing the following steps:
Figure 59. Installing the add-in card into the PCIe* cassette assembly
1.
Carefully insert the add-in card into the adapter cassette.
2.
Loosen bracket screws for about 1/4 turn to adjust the adapter bracket to secure the add-in card
according to length; then tighten bracket screws (see Number 2).
3.
Fasten the screw to secure the add-in card to the cassette (see Number 1).
Summary of Contents for R2600SR Series
Page 2: ...Blank page...
