Intel
®
Server System R2000WT Product Family System Integration and Service Guide
38
•
Secure the device using four screws (see letter ‘d4’)
2.7.1.4
3.5” Drive Carrier Insertion
Figure 44. Hard Disk Drive Installation – Inserting 3.5” HDD assembly
•
With the lever open, insert the drive assembly into the drive bay (see letter ‘E’)
•
Push in the lever to lock it into place (see letter ‘F’)
2.7.2
8 x 2.5”, 16 x 2.5”, and 24 x 2.5” Front Drive Bay Storage
2.7.2.1
2.5” Drive Carrier Extraction
Figure 45. Installing Hot-swap storage devices – 2.5” carrier extraction
•
Remove the drive carrier from the chassis by pressing the green button and pulling open the lever (see
letter ‘A’)
•
Pull the carrier out of the drive bay (see letter ‘B’)
