Intel
®
Server System R2000WT Product Family System Integration and Service Guide
15
1.3.3
Internal Cable Routing and Connections
All cables in the system that need to be routed from front-to-back, should be routed using the cable
channels between the chassis sidewalls and the air duct sidewalls as shown in the following illustration.
When routing cables front-to-back, none should be routed through the center of the system or in the area
between the system fans and the DIMM slots. Cable connection instructions provided in this section are
presented in the recommended order in which they should be installed. See Appendix B for additional
System Cable routing illustrations.
Figure 14. Cable Routing Diagram
Connect Internal Cables for Front Control Panel and Front I/O
