Intel R1304BTLSFAN, Service Manual

Page: 68 / 112

48 Intel
®
Server System R1304BTSSFAN/R1304BTLSFAN/R1304BTLSHBN Service Guide
Installing or Removing a Slimline Optical Drive
Caution: The optical drive is NOT hot-swappable. Before removing or replacing the optical drive,
you must first take the server out of service, turn off all peripheral devices connected to
the system, turn off the system by pressing the power button, and unplug the AC power
cord from the system or wall outlet.
Installing a Slimline Optical Drive
Notes:
•
If you are replacing an optical drive, see “Installing a Slimline Optical Drive” on
page 48 for instructions first. Return to these steps when directed.
1. Observe the safety and ESD precautions at the beginning of this book. See “Safety
Information” on page iii .
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove two screws secured the Filler Panel.
4. Remove the Filler Panel.
Figure 27. Removing the Knock-out from the Sheet Metal Panel
5. Attach the latch to the optical drive as shown, using two screws.
B
A
AF003724