Server System Features
10
Intel
®
Server System R1000BB Service Guide
Figure 9. Configuration Jumpers
Peripheral Devices
The Intel
®
Server System R1000BB provides locations and hardware for installing hard drives, CD-
ROM drive, or DVD-ROM drive. The following figure shows the available options.
A
System Label Pull-out
B
Slimline Optical Drive Bay
C
Video Port
D
USB Ports
E
Front Control Panel
F
Hard Disk Drive Bays
Figure 10. Optional Peripherals (8x2.5-inch hard drive bays as shown)
Hard Disk Drive Carriers
The Intel
®
Server System R1000BB ships with either 3.5-inch or 2.5 inch hard disk dirve carrier,
and with different maximun number of hard disk drives, see Table 4 for details :
Table 3. Hard Disk Drive Options
Intel
®
Server System
Supported Hard Drive Type
Maximun Hard Drive Number
R1304BB
3.5-inch or 2.5-inch
4
R1208BB
2.5-inch
8
Note: SAS drives are only supported when proper Intel
®
RAID C600 Upgrade Key or Intel
®
Integrated
RAID Module is installed.
For instructions on installing hard drives, see
“Installing a Hot-swap Hard Disk Drive”
.
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a maximum
ambient temperature of 45
°
C.
Note: The Intel
®
Server System R1000BB does not support all SAS or Serial ATA (SATA) hard drives. For
a web link to a list of supported hard drives, see
“Additional Information and Software”
.
