Intel PXA27x Series Page 11 User Manual Download

Page: 11 / 88

Intel

PXA27x Processor Developer’s Kit - User’s Guide

Hardware Description

This chapter describes the Intel

PXA27x Processor Developer’s Kit (kit) hardware.

•

Section 2.1 — User-Interface Panel

•

Section 2.2 — Intel® PXA27x Processor Developer’s Kit Main Board

The Intel

PXA27x Processor Developer’s Kit Main Board (main board) serves as the

docking station for an Intel

PXA27x Processor Developer’s Kit Daughter Card (daughter

card) to make it easier for you to develope many different types of applications. The main
board features peripheral devices, sockets for various expansion cards, extensive input/output
(I/O) capability, and user-interface aids.

•

Section 2.3 — Intel® PXA27x Processor Developer’s Kit Daughter Card

The daughter card contains the Intel

PXA27x Processor Card (processor card), memory,

nominal I/O capability, and the required power circuitry Intel

PXA27x Processor

Developer’s Kit Power Manager Integrated Circuit (Low DropOut) Card (PMIC card) for two
modes of operation:

— When docked with the main board, the daughter card provides a complete development

and evaluation system.

— In self-contained (stand-alone) mode, the daughter card can boot and function

independently of the main board, although without the extensive I/O capability furnished
by the main board.

•

Section 2.4 — Intel® PXA27x Processor Card

•

Section 2.5 — Power Management

Figure 1

shows an overview of the kit.

Summary of Contents for PXA27x Series

























































































Search results

Summary of Contents for PXA27x Series

Reviews:

Related manuals for PXA27x Series

Brands by name

Popular brands

Intel PXA27x Series, User Manual

Search results

Summary of Contents for PXA27x Series

Reviews:

Related manuals for PXA27x Series

Brands by name

Popular brands