Hardware Installations and Upgrades
Intel
®
Server Chassis P4000M Service Guide
51
Installing 2.5" Hotswap Hard Disk Drive in 2.5'' HDD Carrier
1. Open the Hotswap HDD door.
2. Remove the drive carrier by pressing the green latch to unlock and pull out the black lever (see letter
A
).
3. Slide the carrier out (see letter
B
).
Figure 78. Sliding the 2.5
''
HDD Carrier from the chassis
4. Remove the four screws securing the plastic retention drive from the 2.5'' HDD carrier (see letter
C
)
5. Disengage the plastic retention device from the HDD carrier (see letter
D
).
6. Remove the plastic retention device from the 2.5'' HDD carrier (see letter
E
).
Figure 79. Removing the plastic retention device from Carrier
Summary of Contents for P4000M
Page 14: ......
