User Guide for NUC7i3DNKE, NUC7i5DNKE, and NUC7i7DNKE
5
To install an 80mm M.2 SSD:
1.
Remove the small silver screw from the 80mm metal standoff on the motherboard (A).
2.
Align the small notch at the bottom edge of the M.2 card with the key in the connector.
3.
Insert the bottom edge of the M.2 card into the connector (B).
4.
Secure the card to the standoff with the small silver screw (C).
Close the Chassis
After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by
hand with a screwdriver to avoid over-tightening and possibly damaging the screws.
