11
NUC5i3RYHSN
User Guide – October 2018
Install a 2.5” SSD or Hard Drive
Intel NUC Kits NUC5i3RYHSN support an additional 2.5” Solid State Drive (SSD) or
Hard Disk Drive (HDD).
Find compatible 2.5” drives in the Intel Product Compatibility Tool:
NUC5i3RYHSN
1.
Unscrew the four screws holding the current drive in the bay.
2.
Remove the pre-installed drive from the drive bay.
3.
Slide the new 2.5” drive into the drive bay, ensuring the SATA connectors are fully
seated into the connectors of the SATA daughter card (A).
