Intel NUC Kit DE3815TYKHE User Guide
3
This guide tells you how to:
•
Install and remove memory
•
Install a wireless card
•
Install a 2.5” drive
•
Attach the chassis stand
•
Attach the VESA mount bracket
•
Install an operating system
•
Install the latest drivers
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1.
Unscrew the two screws (A) on the front panel of the chassis and lift the cover (B).
Installing and Removing Memory
Intel NUC Kit DE3815TYKHE has one 204-pin DDR3L SO-DIMM socket. Memory requirements:
1.35V low voltage memory
1066 MHz SO-DIMM
Non-ECC
For a list of tested memory, go to the
page on the Support site.
Install SO-DIMMs
To install a SO-DIMM, follow these steps:
1.
Observe the precautions in "Before You Begin" on page 2.
