Intel® IP Network Server NSW1U
A Anti-static connection
B RJ45 serial port (COM2/serial B)
C 4xGbE bypass-enabled NIC
ports (NSRA0401W)
D Control panel
E 4xGbE NIC ports (optional)
F Optical device (optional)
G USB port 2
H Hard disk drive bay 1
I Hard disk drive bay 0
J Power LED
K System status LED
L Disk activity/fault LED
M NIC activity LED
N ID LED
O Power switch
P Reset switch
Q NMI switch
R ID switch
G
L
K
J
M N
O
Q
R
P
A B
C
D
E
F
H
I
Figure 2.
Front Panel (NSRA0401W configuration shown)
Figure 3.
Back Panel (NSRA0201W/NSRA0401W configuration shown)
A
B
C
D
E
F
G
H
I
J
K
L
A RJ45 serial port
(COM2/serial B)
B PCI cage thumbscrew
C PCI add-in card bracket or
filler panel
D Power supply #1 (hot-swap
if two power supplies are
installed)
E Power supply #2/optional
(hot-swap if two power
supplies are installed)
F PS/2 mouse and keyboard
connectors
G Video connector
H USB 0
I USB 1
J 4xGbE NIC ports
(NSRD0201W, NSRA0201W,
and NSRA0401W)
K Remote management
connector
L Ground studs for DC input (2)
Specifications
Processor
Type
Single 64-bit Quad-Core Intel® Xeon® processor
5400 series or single 64-bit Dual-Core Intel®
Xeon® processor 5100 series
Chipset
Intel® 5000P chipset
Core
Quad or Dual
Front-side bus
Supports 1066 MHz and 1333 MHz
Network interface
4 x GbE ports or 8 x GbE ports (bypass SKU,
four ports are bypass-enabled). All products
support four additional ports as an option over
the respective standard configuration.
Memory
Cache Memory
12 MB or 4 MB shared L2 cache
Maximum Memory Capacity
24 GB with 4 GB memory per DIMM
Registered ECC SDRAM DIMMs
Number of DIMM slots
Six
Memory type
Fully Buffered DIMM technology at
533 MHz and 667 MHz
Chipset
Memory Controller Hub
Intel® 5000P Memory Controller
Hub (MCH)
I/O Controller Hub
Intel® 6321ESB I/O Controller Hub