Intel M70KLP Series, Service Manual

Page: 57 / 109

Intel® Server System M70KLP Family Service Guide
55
O n the bottom edge of each front mounted 2.5” drive carrier are LEDs for Drive Activity and Drive Fault.
Label Description Description
1 Activity Status LED
Steady green: Normal
Flashing green: Read and write activity
2 Fault Alarm LED
Steady red: A failure has occurred
Steady blue: Drive positioning
Steady pink: RAID rebuilding
Figure 68 . 2.5” Hot Swap Drive LED Identification
The Standard and GPU Enabled systems will each include an air duct designed to meet the specific airflow
and features requirements of the system.
Figure 69. Air Duct Options
The Standard air duct will accommodate 2U processor heat sinks and allow support for up to six (6) half
height / half-length PCIe add-in cards on the server board, three (3) full-height/half-length PCIe add-in cards
from Riser #0 and up to three (3) half-height/half-length PCIe add-in cards from Riser #1. The top side of the
air duct has mounting features for an M.2 interface board capable of supporting up to two (2) SATA M.2
SSDs, and support for up to three (3) Intel® RAID Maintenance Free Backup (RMFBU) modules.
Standard Air Duct Low Profile Air Duct (GPU Systems Only)