Intel® Server System M50CYP2UR Family System Integration and Service Guide
72
3.10.2
Intel® VROC 7.5 (VMD NVMe* RAID) Key Removal
Figure 82. Intel® VROC Key Removal
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
Section 3.1.1
3.
Remove the air duct (see
Section 3.2.1
).
4.
Using the key pull tab, pull the key up until it disengages from the connector.
5.
Reinstall the air duct (see
Section 3.2.2
6.
Reinstall the system top cover (see
Section 3.1.2
3.11
Intel® SAS Interposer Card and SAS RAID Module Installation / Removal
This section provides instructions to install and remove an Intel® SAS interposer card and an Intel® SAS Raid
module. Refer to the
Intel® Server M50CYP Family Configuration Guide
for available options.
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
Note:
A SAS interposer card needs to be installed before installing a SAS RAID module.
