Intel® Server System M50CYP2UR Family System Integration and Service Guide
71
3.10
Intel® VROC 7.5 Key Installation / Removal
This section provides instructions to install an Intel® VROC Key in the system. Refer to the
Intel® Server
M50CYP Family Configuration Guide
for available options,
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
For more information on the Intel® VROC features, capabilities, and NVMe* drive population rules, refer to
the
Intel® Server System M50CYP2UR Family Technical Product Specification.
3.10.1
Intel® VROC 7.5 (VMD NVMe* RAID) Key Installation
Figure 81. Intel® VROC Key Insertion
1.
Power off the system and disconnect the power cable(s).
2.
Remove the system top cover (see
Section 3.1.1
3.
Remove the air duct (see
Section 3.2.1
).
4.
Remove the Intel® VROC Key from its packaging.
5.
Locate the white 4-pin key connector near the CR2032 battery.
6.
To install the key, place it over the connector and confirm the orientation of the key matches that of the
connector.
7.
Press the key down onto the connector.
8.
Reinstall the air duct (see
Section 3.2.2
9.
Reinstall the system top cover (see
Section 3.1.2
