Intel® Server System M20NTP1UR - System Integration and Service Guide
70
6.9
Backplane Replacement
Required Tools and Supplies:
•
Intel backplane spare kit: iPC
AXXHSBP1304
•
#2 Phillips* head screwdriver
•
Anti-static wrist strap and conductive workbench pad (recommended)
1.
Power off the system and disconnect all cables from the back of the system.
2.
Remove all drive carriers from the front drive bay
3.
Remove the system top cover (see
Section 6.1.1
4.
Remove all cables attached to the backplane
5.
Carefully remove the backplane from the system (See the following figures)
Figure 84. Backplane Removal (Step 1)
•
Remove the three screws securing the backplane to the drive bay (see Letter “A”).
Figure 85. Backplane Removal (Step 2)
•
Carefully rotate the top edge of the backplane away from the drive bay to release it from the
screw mounts. (See Letter “B”)
Summary of Contents for M20NTP1UR
