Intel® Server System M20NTP1UR - System Integration and Service Guide
61
6.6.2
3.5” Drive Replacement
1.
Remove the drive from the drive carrier (See
Figure 67. 3.5” Drive Removal from Drive Carrier
•
Hold the carrier assembly top side down in your right hand. Using your left hand, gently rotate
the bottom edge of the left rail upwards (see Letter “A”) while at the same time pushing the drive
down away from the carrier (see Letter “B”).
2.
Locate and unpack the replacement 3.5” drive
3.
Install the replacement drive into the drive carrier (See
Figure 68. 3.5” Drive Installation to Drive Carrier
•
Position the drive interface connector towards the back of the drive carrier
•
Align and position the mounting holes on the left side of the drive over the mounting tabs located
on the drive carrier side rail (See Letter “A”)
•
Lower the right side of the drive into the carrier and press down until all mounting tabs lock in
place.
•
With the rear drive connector positioned towards the back of the drive carrier, align, and position
the mounting holes on the left side of the drive over the mounting tabs located on the drive
carrier side rail (See Letter “A”)
•
Lower the other side of the drive into the carrier and press down until all mounting tabs lock in
place
Summary of Contents for M20NTP1UR
