Intel® Server System M20NTP1UR - System Integration and Service Guide
30
3.2
Air Duct Removal and Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
3.2.1
Air Duct Removal
1.
Power off the system and remove the system top cover (see
Section 3.1.1
2.
Remove the air duct from the system (See
Figure 23. Air Duct Removal
•
Lift the air duct straight up and away from the server system.
3.2.2
Air Duct Installation
To maintain proper air flow within the system, the air duct must be in place when the system is operating.
1.
Orient the cable channels on each side of the air duct towards the front of the system
2.
Install the air duct into system (See
Figure 24. Air Duct Installation
•
Lower the air duct into the system, ensuring that all cables are clear from the installation area
•
The air duct is properly installed when it sits flat and is securely in place
Summary of Contents for M20NTP1UR
