Intel® Server System M20NTP1UR - System Integration and Service Guide
29
Note:
A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
3.
Remove the Top Cover (See
Figure 21. System Cover Removal
•
While pushing down on both the left and right buttons (see Letter “B”), slide the top cover ~10mm
towards the back of the chassis (see Letter “C”).
•
Carefully lift the top cover up and away from the chassis.
3.1.2
System Top Cover Installation
1.
Place and secure the top cover to the chassis (See
Figure 22. System Cover Installation
•
Align and place the top cover on the top edges of the chassis.
•
Slide it towards the front of the chassis until it locks into place (see Letter “A”).
Shipping Note:
When transporting the server system, Intel recommends installing the three top cover
screws before shipping (see Letter “B”).
Summary of Contents for M20NTP1UR
