Intel® Server System M20NTP1UR - System Integration and Service Guide
18
2.1
System Top Cover Removal / Installation
Required Tools and Supplies
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* head screwdriver #1
2.1.1
System Top Cover Removal
Removal of the top cover is necessary when installing or replacing any system component within the server
chassis.
The system ships from the factory with the top cover secured to the chassis using three screws.
1.
Remove the three top cover screws (See
Figure 3. System Top Cover Screws
Note:
A non-skid surface or a stop behind the server system may be needed to prevent the server system
from sliding on the work surface.
2.
Remove the top cover (See
Figure 4. System Cover Removal
Summary of Contents for M20NTP1UR
