Intel® Server System M20MYP1UR System Integration and Service Guide
61
7.
System Service-FRU Replacement
This chapter provides instructions for the removal and installation of system components considered as field
replaceable. Components within the system can only be serviced after the system has been powered off and
AC power has been disconnected from the server system.
Before You Begin
Before working with your server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
Required Tools and Supplies:
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* (cross head) screwdriver (#2 bit)
•
Flat Head screwdriver
System Reference
All references to left, right, front, and back, assume the reader is facing the front of the system or the side
opposite that of the external I/O connectors of the server board.
