manualshive.com logo in svg

Intel IXP2400, User Manual

Share
Download
Intel IXP2400 User Manual Download Page 254

254

 Development Tools User’s Guide

  

Intel

®

 IXP2400/IXP2800 Network Processors

Transactor

•

C "int" =11

•

User-Defined=12

•

Vector=13

•

User-Defined Function=14

•

Macro=15

•

Internal=24 

•

Statistic=16

•

Watch=17

•

Model Artifact=18

•

Constant=19

•

Imported=20

•

Ubreak=21

•

Statistic=22

•

String=23

system( char *shell_cmd ):

 Implements the C "system" function which passes a shell 

command to the OS or executing shell. The return status resulting from 
the execution of the command is returned by this function

uaddr( control_store_state, label_name ):

 Returns the micro-address value of 

the specified label name within the specified control_store_state. If the 
label is not found, it returns -1

uninitialized()

: 

Returns 1 if the model is not yet initialized; otherwise it returns 0.

valid_elements( array_state_name ):

 Returns the number of valid elements in the 

specified array. If an array index is included in the array_state_name, the 
function returns a boolean value reflecting the validity of only the 
specified array element.

valid_file( file_name ):

 Indicates if the specified file_name exists. If it does, the entire 

path and file name is returned; otherwise an empty string is returned. The 
specified file name can have an absolute or relative path included, or it 
can assume the default path specified by the current working directory. 
The file specification can include a wildcard name which will return a 
matched file name only if the specification matches exactly one (1) file.

8.7

Error Handling

When an error is generated, it is printed to the console and to any log files that have been 
configured to record simulator responses. Additionally, the built-in simulation state 
"

sim.error_count

" is incremented. The built-in simulation state, 

"

sim.error_handle_mode

", can be used to alter this default error handling behavior. See 

Section 8.5

 for the error handling values and their corresponding modes.

The default error handle mode value is 40.

Summary of Contents for IXP2400

































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands