manualshive.com logo in svg

Intel IXP2400, User Manual, Page: 135 / 320

Share
Download
Intel IXP2400 User Manual Download Page 135

Development Tools User’s Manual  

135

IXP2400/IXP2800 Network Processors

Developer Workbench

2.13.10.5

Enabling and Disabling Breakpoints

To enable or disable breakpoints on code locations, do the following:

1. Place the insertion cursor on the line at which you wish to enable/disable a breakpoint.

2. On the 

Debug 

menu, click 

Breakpoint

, then click 

Enable/Disable

, or

Click the 

 button on the 

Debug

 toolbar. (This button is not on the default 

Debug

 menu. To 

put this button there, see 

Section 2.2.3.4

.), or

Press CNTRL+F9.

Or:

1. Right-click the line at which you wish to enable/disable a breakpoint.

2. Click 

Enable/Disable Breakpoint

 from the shortcut menu.

To disable all breakpoints: 

•

On the 

Debug 

menu, click 

Breakpoint

, then click 

Disable All

, or

Click the 

 button on the 

Debug

 toolbar. (This button is not on the default 

Debug

 menu. To 

put this button there, see 

Section 2.2.3.4

.).

To enable all breakpoints: 

•

On the 

Debug 

menu, click 

Breakpoint

, then click 

Enable All

, or

Click the 

 button on the 

Debug

 toolbar. (This button is not on the default 

Debug

 menu. To 

put this button there, see 

Section 2.2.3.4

.).

2.13.10.6

Changing Breakpoint Properties

To change the breakpoint properties, 

1. Open a thread window for one of the threads in the Microengine where the breakpoint is set. 

2. Place the insertion cursor on the line where you want to change breakpoint properties.

3. On the 

Debug 

menu, click 

Breakpoint

, then click 

Properties

.

The 

Breakpoint Properties

 dialog box appears (see 

Figure 39

). T

In this dialog box you can:

•

Select or clear 

Enabled

 to enable or disable the breakpoint.

•

Select the functions you wish to change and then click 

OK

.

•

Click 

Remove 

in the

 Breakpoint Properties

 dialog box to remove the breakpoint.

2.13.10.7

About Multi-Microengine Breakpoint Support

Support for the ability to manipulate a breakpoint in multiple Microengines simultaneously has 
been added to the Workbench. When the user right-clicks on a code line in a thread window, the 
context menu that gets displayed contains a new item labeled 

Multi-Microengine Breakpoint

. If 

the user selects this item, the Workbench displays the dialog box shown in 

Figure 40

. 

Summary of Contents for IXP2400

































































































































































































































































































































Reviews:

No comments