manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 490

Volume 4: IA-32 SSE Instruction Reference

4:483

4.9

Instruction Formats

The nature of the Intel SSE architecture allows the use of existing instruction formats. 
Instructions use the ModR/M format and are preceded by the 0F prefix byte. In general, 
operations are not duplicated to provide two directions (i.e. separate load and store 
variants). 

4.10

Instruction Prefixes

The SSE instructions use prefixes as specified in 

Table 4-6

, 

Table 4-7

, and 

Table 4-8

. 

The effect of multiple prefixes (more than one prefix from a group) is unpredictable and 
may vary from processor to processor.

Applying a prefix, in a manner not defined in this document, is considered reserved 
behavior. For example, 

Table 4-6

 shows general behavior for most SSE instructions; 

however, the application of a prefix (Repeat, Repeat NE, Operand Size) is reserved for 
the following instructions:

ANDPS, ANDNPS, COMISS, FXRSTOR, FXSAVE, ORPS, LDMXCSR, MOVAPS, MOVHPS, 
MOVLPS, MOVMSKPS, MOVNTPS, MOVUPS, SHUFPS, STMXCSR, UCOMISS, UNPCKHPS, 
UNPCKLPS, XORPS.

Table 4-6.

SSE Instruction Behavior with Prefixes  

Prefix Type

Effect on SSE Instructions 

Address Size Prefix (67H)

Affects SSE instructions with memory operand
Ignored by SSE instructions without memory operand.

Operand Size (66H)

Reserved and may result in unpredictable behavior.

Segment Override 
(2EH,36H,3EH,26H,64H,65H)

Affects SSE instructions with mem.operand
Ignored by SSE instructions without mem operand

Repeat Prefix (F3H)

Affects SSE instructions 

Repeat NE Prefix(F2H)

Reserved and may result in unpredictable behavior.

Lock Prefix (0F0H)

Generates invalid opcode exception.

Table 4-7.

SIMD Integer Instructions – Behavior with Prefixes

Prefix Type

Effect on Intel

®

 MMX

™ 

Technology Instructions 

Address Size Prefix (67H)

Affects Intel

 

MMX technology

 

instructions with mem. operand

Ignored by Intel

 

MMX technology instructions without mem. operand.

Operand Size (66H)

Reserved and may result in unpredictable behavior.

Segment Override 
(2EH,36H,3EH,26H,64H,65H)

Affects Intel

 

MMX technology instructions with mem. operand

Ignored by Intel

 

MMX technology instructions without mem operand

Repeat Prefix (F3H)

Reserved and may result in unpredictable behavior.

Repeat NE Prefix(F2H)

Reserved and may result in unpredictable behavior.

Lock Prefix (0F0H)

Generates invalid opcode exception.

Table 4-8.

Cacheability Control Instruction Behavior with Prefixes 

Prefix Type

Effect on SSE Instructions 

Address Size Prefix (67H)

Affects cacheability control instruction with a mem. operand
Ignored by cacheability control instruction w/o a mem. operand.

Operand Size (66H)

Reserved and may result in unpredictable behavior.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands