Intel ISP1100 - Server Platform - 0 MB RAM, Installation Manual

Page: 12 / 20

Intel ISP1100 Internet Server Slimline CD-ROM/Floppy Drive Kit
Reconnect the Hard Drive Data Cable
1. Slide the hard drive data cable (A) back under the retention bracket (B).
2. Connect the cable to appropriate controller.
• If the system has IDE drive(s), connect the cable to the primary IDE connec-
tor (C) on the server board.
• If the system has SCSI drive(s), connect the cable to the SCSI card on the
riser assembly.
Note: The riser assembly is still outside of the chassis. Hold the riser assembly
above the chassis, plug the SCSI cable into the SCSI card, then go to the
next step, “Reinstall the Riser and Add-in Card(s).”
B
A
C
OM09751
10