21
MANAGING DEVICES
C H A P T E R
3
To add a trap receiver
1
Right-click the hub image.
2
Click Management Module, then click Trap Receiver
Configuration on the menu that appears.
3
Click Add in the Trap Receivers dialog box.
4
Type the IP address and community string of the PC you want to
receive traps from the Management Module, then click Add.
5
Click Close.
Setting alarms
An alarm monitors a variable and generates an event (an SNMP trap,
log event, or both) when a limit is exceeded. The Quick Alarms dialog
box allows you to automatically set up rising alarms on these
commonly-used SNMP variables:
•
Network utilization exceeding 50%
•
Broadcast packets exceeding 3000 per second
•
CRC align errors exceeding 10 per second
•
Collisions exceeding 30000 per second
To set Quick Alarms
1
Right-click the hub image.
2
On the menu that appears, click RMON, Alarms, and Configure.
The Alarms Table dialog box appears.
3
Click Add.
The Quick Alarms dialog box appears.
Summary of Contents for Intel Device View
Page 1: ...Device View Guide...
