32
Set it as enabled if you wish to resume the system by keyboard. The optional setting is :
Enabled; Disabled.
Power On by Mouse
Set it as enabled if you wish to resume the system by mouse. The optional setting is : Enabled;
Disabled.
Serial Port1 /Port 2 Address
Use this item to select serial port address for serial port one.
Serial Port2 Mode
The optional settings are: Normal; IrDA (1.6 ns); IrDA(3/16 bit).
PWRON After PWR-Fail
The optional settings are: Always On; Always Off and Former-Sts.
3-7-4 USB Configuration
CMOS Setup Utility-Copyright(C)1985-2005 American Megatrends. Inc.
USB Configuration
USB Configuration
Help Item
Module Version -2.24.3-13.4
USB Devices Enabled
None
Legacy USB Support Enabled
Port 64/60 Emulation Disabled
USB 2.0 Controller Mode HiSpeed
BIOS EHCI Hand-Off Enabled
Hotplug USB FDD Support Auto
Enables support for legacy
USB. AUTO option disables
Leacy support If no USB devices
are connected
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Discard Changes F6:Fail-Safe Defaults F7:Optimized Defaults
Port 64/60 Emulation
Enables I/O put 64h/60h emulation support. This should be enabled for the complete USB
keyboard legacy support for non-USB aware OSes. The optional settings are: Enabled;
Disabled.
USB 2.0 Controller Mode
This item configures the USB 2.0 controller in the Hi-Speed (480Mbps) or Full-Speed (12
Mbps) mode.
BIOS EHCI Hand-Off
This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change
should claim by EHCI driver.
Hotplug USB fdd Support
A dummy FDD device is created that will be associated with the hotplug FDD later. Auto
option creates this dummy device only if there is no USB FDD present.
Summary of Contents for ICH10R
Page 54: ......
