Intel i865-G User Manual Download Page 42

Page: 42 / 86

BIOS

Page 4-8

AGP Aperture Size (MB)

This item defines the size of the aperture if you use an AGP graphics adapter. It
refers to a section of the PCI memory address range used for graphics memory.
Options: 4, 8, 16, 32, 64, 128, 256 MB.

Init Display First

If two video cards are used (1 AGP and 1 PCI) this specifies which one will be the
primary display adapter.
Options: PCI Slot, AGP.

** On-Chip VGA Settings **

On-Chip VGA

This item allows you to control the on-chip VGA.
Options: Enabled, Disabled.

On-Chip Frame Buffer Size

This item allows you to control the on-chip frame buffer size.
Options: 1MB, 8MB, 16MB.

Boot Display

This item allows you to selcet the boot display device.
Options: Auto, CRT, TV, EFP.

All manuals and user guides at all-guides.com

Summary of Contents for i865-G























































































Search results

Summary of Contents for i865-G

Reviews:

Related manuals for i865-G

Brands by name

Popular brands

Intel i865-G, User Manual

Search results

Summary of Contents for i865-G

Reviews:

Related manuals for i865-G

Brands by name

Popular brands