1-10
Intel® Integrated RAID Controller GSU31 User’s Manual
Rev 1.0
Quick Start Instructions
11. A screen prompt will ask which components (see below) you wish to install. Select the
following components and hit F10 to continue. See
.
BKSTROSM.HAM
HTTP and Winsock Services
RAID Management Agents
Figure 1-5. Component Installation
The appropriate files are copied and the AUTOEXEC.NCF and STARTUP.NCF files are
modified as necessary.
12. After the installation is complete, reboot the server.
13. Installation of your GSU31 is now complete. Refer to subsequent chapters in this user’s
manual for additional information.
1.7.3
Setup and Installation for UnixWare* 7.1
1.7.3.1
Software Requirements
•
GSU31 CD-ROM
•
Hard disk space: minimum 20 MB
•
GSU31 UnixWare Installation Disk (HBA diskette) (created in
)
•
SCO UnixWare 7.1 software with Netscape 4.08 or greater†
†
Not supplied
1.7.3.2
Installing UnixWare on a RAID Volume on a Stand Alone Server
Follow the required procedure below to install Intel Integrated RAID.
1. Insert the UnixWare installation disk 1 (of 2 disks) and reboot. Install the OS using the install
instruction provided in UnixWare 7 Installation Guide manual. UnixWare will prompt you to
